Medusa Bikes
BONANZA FAT HANDLEBARS 1.25" / 1" CLAMP, 12" (285 MM) OR 14" (355 MM) FOR SELECTED HARLEY-DAVIDSON (1982–2024) – BLACK/CHROME, TÜV – SANTEE
BONANZA FAT HANDLEBARS 1.25" / 1" CLAMP, 12" (285 MM) OR 14" (355 MM) FOR SELECTED HARLEY-DAVIDSON (1982–2024) – BLACK/CHROME, TÜV – SANTEE
Delivery time on request
We are happy to check the delivery time for you.
Your legal guarantee rights
Couldn't load pickup availability
⚠️ Note on Approval & Installation: Some of the offered parts requiring approval or being TÜV-relevant do not have TÜV, ABE, EG, or parts certificate approval. If no such approval is stated in the respective product description, these parts are not approved for public road traffic and may need to be registered through individual inspection or are intended exclusively for racing or show purposes. Depending on the vehicle and product, adjustments or additional installation work may also be required. Not all items can be installed Plug & Play.
🔔 Availability: Stock levels may vary in individual cases. Unavailable items will, of course, be refunded.
Manufacturer's specifications +
Manufacturer Information
Parts Europe GmbH
Conrad-Röntgen-Str. 2
Rheinland-Pfalz
54332 Wasserleisch
info@partseurope.eu
https://www.partseurope.eu
Split

Manufacturer - PARTS EUROPE
Manufacturer Information
Parts Europe GmbH
Conrad-Röntgen-Str. 2
Rheinland-Pfalz
54332 Wasserleisch
info@partseurope.eu
https://www.partseurope.eu
BONANZA FAT HANDLEBAR 1.25" / 1" CLAMP, 12" (285 MM) OR 14" (355 MM) FOR SELECTED HARLEY-DAVIDSON (1982–2024) – BLACK/CHROME, TÜV
This item is the Santee Bonanza Fat Bar – not the narrower 1" Bonanza II. The handlebar tube measures 1.25" and is reduced to 1" at the grip ends and clamp area.
The previous low version was listed as 11" in the shop. The current European product designation is 12" with an actual height of 285 mm; the variant display is therefore clearly listed with inch and millimeter measurements.
DETAILS
Santee Bonanza Fat Bar
Non-dimpled, triple drilled
Prepared for internal wiring
For mechanical throttle and Throttle-by-Wire
Not suitable for heated grips
For 1" risers
COMPATIBILITY
Harley-Davidson with 1" risers and suitable instrument panel, generally model years 1982–2024
Not for Softail from 2025
Not for Touring FL4 from 2023
The approval applies only to the specific models and model years listed in the TÜV report
For Road Glide FLTR from 2015, the 693596 clamp kit may be required
TECHNICAL DATA
Width: 32" / approx. 813 mm
Low height: 285 mm, current product designation 12"
Medium height: approx. 355 mm / 14"
Center width: 7" / approx. 178 mm
Pullback: 6" / approx. 152 mm
Handlebar tube: 1.25"
Clamp and grip area: 1"
Clamp width: approx. 138 mm
VARIANTS
Height: 12" / 285 mm, 14" / 355 mm
Color: Black, Chrome
SCOPE OF DELIVERY
1 × Santee Bonanza Fat Handlebar in the selected height and color
1 × TÜV report
CERTIFICATION
TÜV report available
The specific vehicle assignment in the report is decisive before ordering and registration
Installation must be carried out by a professional workshop or a qualified person. We accept no liability for damage or malfunctions caused by incorrect or improper installation. Your statutory rights in the event of a product defect remain unaffected.
BONANZA FAT HANDLEBAR 1.25" / 1" CLAMP, 12" (285 MM) OR 14" (355 MM) FOR SELECTED HARLEY-DAVIDSON (1982–2024) – BLACK/CHROME, TÜV
This item is the Santee Bonanza Fat Bar – not the narrower 1" Bonanza II. The handlebar tube measures 1.25" and is reduced to 1" at the grip ends and clamp area.
The previous low version was listed as 11" in the shop. The current European product designation is 12" with an actual height of 285 mm; the variant display is therefore clearly listed with inch and millimeter measurements.
DETAILS
Santee Bonanza Fat Bar
Non-dimpled, triple drilled
Prepared for internal wiring
For mechanical throttle and Throttle-by-Wire
Not suitable for heated grips
For 1" risers
COMPATIBILITY
Harley-Davidson with 1" risers and suitable instrument panel, generally model years 1982–2024
Not for Softail from 2025
Not for Touring FL4 from 2023
The approval applies only to the specific models and model years listed in the TÜV report
For Road Glide FLTR from 2015, the 693596 clamp kit may be required
TECHNICAL DATA
Width: 32" / approx. 813 mm
Low height: 285 mm, current product designation 12"
Medium height: approx. 355 mm / 14"
Center width: 7" / approx. 178 mm
Pullback: 6" / approx. 152 mm
Handlebar tube: 1.25"
Clamp and grip area: 1"
Clamp width: approx. 138 mm
VARIANTS
Height: 12" / 285 mm, 14" / 355 mm
Color: Black, Chrome
SCOPE OF DELIVERY
1 × Santee Bonanza Fat Handlebar in the selected height and color
1 × TÜV report
CERTIFICATION
TÜV report available
The specific vehicle assignment in the report is decisive before ordering and registration
Installation must be carried out by a professional workshop or a qualified person. We accept no liability for damage or malfunctions caused by incorrect or improper installation. Your statutory rights in the event of a product defect remain unaffected.
First-class support
Secure payment
Free shipping in Germany
Premium quality