Medusa Bikes
REAR LOWERING KIT FOR HARLEY-DAVIDSON SOFTAIL M8 (2018–2025)
REAR LOWERING KIT FOR HARLEY-DAVIDSON SOFTAIL M8 (2018–2025)
Available
Your legal guarantee rights
Couldn't load pickup availability
⚠️ Note on Approval & Installation: Some offered parts that require approval or are TÜV-relevant do not have TÜV, ABE, EC, or parts certificate approval. If no corresponding approval is stated in the respective product description, these parts are not approved for public road traffic and may have to be registered via individual inspection or are intended exclusively for racing or show purposes. Depending on the vehicle and product, adjustments or additional installation work may also be required. Not all items are plug & play installable.
🔔 Availability: Stock levels may vary in individual cases. Items that are not available will, of course, be refunded.
Manufacturer's specifications +
Manufacturer Information
UAB Killer Custom
Registration code 303193988
VAT LT100008356213
Radvilų g. 5, Pėdžių k.
LT-58149
Lithuania
Phone +370 644 84255
Email info@killercustom.com
Responsible Person in the EU
UAB Killer Custom
Registration code 303193988
VAT LT100008356213
Radvilų g. 5, Pėdžių k.
LT-58149
Lithuania
Phone +370 644 84255
Email info@killercustom.com
Split

Manufacturer - KILLER CUSTOM
Manufacturer Information
UAB Killer Custom
Registration code 303193988
VAT LT100008356213
Radvilų g. 5, Pėdžių k.
LT-58149
Lithuania
Phone +370 644 84255
Email info@killercustom.com
Responsible Person in the EU
UAB Killer Custom
Registration code 303193988
VAT LT100008356213
Radvilų g. 5, Pėdžių k.
LT-58149
Lithuania
Phone +370 644 84255
Email info@killercustom.com
REAR LOWERING KIT FOR HARLEY-DAVIDSON SOFTAIL M8 (2018–2025)
Get the authentic low-rider look for your Softail – with the Killer Custom Rear Lowering Kit. This kit lowers the rear of your Harley-Davidson Softail (2018–2025) by up to 5/8" (approx. 16 mm) without compromising tire clearance. Made from CNC-machined billet aluminum, suitable for all OEM Harley-Davidson mono shock absorbers.
A smart and affordable alternative to expensive air-ride systems – for a lower profile, bold look, and continued safe handling.
DETAILS
Rear lowering for an authentic low-rider look
Lowers by up to 5/8" (approx. 16 mm) without loss of tire clearance
CNC-machined billet aluminum – precise & robust
Easy installation, no frame modifications required
Aluminum limiters protect the fender
Incl. spacer/angle adapter for adjusting the jiffy stand
Affordable alternative to air-ride systems
COMPATIBILITY
All Harley-Davidson Softail models 2018–2025
(e.g. Street Bob, Fat Bob, Low Rider, Breakout, Fat Boy, etc.)
Suitable for OEM Harley-Davidson coilover mono shock absorbers
TECHNICAL DATA
Lowering: up to 5/8" (≈ 16 mm)
Material: CNC-machined billet aluminum
Suitable for: OEM coilover mono shock absorbers
Function: lowers the rear without loss of tire clearance
Advantage: installation without frame modifications
Extras: aluminum limiters for fender protection
Includes: jiffy stand angle adapter (stand adjustment)
Billet aluminum, CNC-machined
VARIANTS
No selectable variants.
SCOPE OF DELIVERY
1× Lowering Bracket with special bearing and seals
2× Aluminum limiters
1× Rubber/polyurethane limiter
1× Jiffy stand angle adapter
1× Installation instructions
CERTIFICATION
No product-specific approval documents are listed on the product page. Vehicle-specific approval must be checked before use on public roads; if necessary, approval by a testing center must be clarified.
Installation must be carried out by a professional workshop or a qualified person. We assume no liability for damage or malfunctions caused by incorrect or improper installation. Your statutory rights in the event of a product defect remain unaffected.
REAR LOWERING KIT FOR HARLEY-DAVIDSON SOFTAIL M8 (2018–2025)
Get the authentic low-rider look for your Softail – with the Killer Custom Rear Lowering Kit. This kit lowers the rear of your Harley-Davidson Softail (2018–2025) by up to 5/8" (approx. 16 mm) without compromising tire clearance. Made from CNC-machined billet aluminum, suitable for all OEM Harley-Davidson mono shock absorbers.
A smart and affordable alternative to expensive air-ride systems – for a lower profile, bold look, and continued safe handling.
DETAILS
Rear lowering for an authentic low-rider look
Lowers by up to 5/8" (approx. 16 mm) without loss of tire clearance
CNC-machined billet aluminum – precise & robust
Easy installation, no frame modifications required
Aluminum limiters protect the fender
Incl. spacer/angle adapter for adjusting the jiffy stand
Affordable alternative to air-ride systems
COMPATIBILITY
All Harley-Davidson Softail models 2018–2025
(e.g. Street Bob, Fat Bob, Low Rider, Breakout, Fat Boy, etc.)
Suitable for OEM Harley-Davidson coilover mono shock absorbers
TECHNICAL DATA
Lowering: up to 5/8" (≈ 16 mm)
Material: CNC-machined billet aluminum
Suitable for: OEM coilover mono shock absorbers
Function: lowers the rear without loss of tire clearance
Advantage: installation without frame modifications
Extras: aluminum limiters for fender protection
Includes: jiffy stand angle adapter (stand adjustment)
Billet aluminum, CNC-machined
VARIANTS
No selectable variants.
SCOPE OF DELIVERY
1× Lowering Bracket with special bearing and seals
2× Aluminum limiters
1× Rubber/polyurethane limiter
1× Jiffy stand angle adapter
1× Installation instructions
CERTIFICATION
No product-specific approval documents are listed on the product page. Vehicle-specific approval must be checked before use on public roads; if necessary, approval by a testing center must be clarified.
Installation must be carried out by a professional workshop or a qualified person. We assume no liability for damage or malfunctions caused by incorrect or improper installation. Your statutory rights in the event of a product defect remain unaffected.
First-class support
Secure payment
Free shipping in Germany
Premium quality